All MIBs › APEX-MIB › apexEcmEmmFirstPid
apexEcmEmmFirstPid
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexEcmEmmFirstPid
OID (numeric): 1.3.6.1.4.1.1166.1.31.15.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: First ECM-EMM PID when PID Remapping is disabled on an output stream. This PID along with the apexEcmEmmNumberPids defines a range of PIDs that the APEX will use for all ECMs and EMMs. These configuration settings allow a user to select a range that other service and ancillary PIDs will not use. This allows the APEX to use PIDs for ECMs and EMMs without having PID collisions. PID collisions will cause the APEX to select another ECM or EMM PID causing momentary glitches of the output video and audio.
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexEcmEmmFirstPid?
Sets the starting PID (Packet Identifier) in the range reserved for ECM and EMM conditional access messages when PID remapping is disabled on an output stream. Together with apexEcmEmmNumberPids, it defines the full PID range used for all ECM/EMM traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.7 snmpwalk -v2c -c public <target> APEX-MIB::apexEcmEmmFirstPid
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.15.1.1.7.1 snmpget -v2c -c public <target> APEX-MIB::apexEcmEmmFirstPid.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.15.1.1.7.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexEcmEmmFirstPid OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15 | apexPsi | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1 | apexPsiConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1 | apexPsiConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.15.1.1.7 | apexEcmEmmFirstPid | APEX-MIB |