All MIBs › APEX-MIB › apexCteEncryptionMode
apexCteEncryptionMode
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexCteEncryptionMode
OID (numeric): 1.3.6.1.4.1.1166.1.31.20.1.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is used to set the Encryption Mode. It applies to all services on all QAMs in CTE mode.
- 'full' - The APEX will use Full encryption. The APEX will only be able to encrypt programs in Full encryption mode if the APEX is able to communicate with an RDS.
- 'fwk' - The APEX will use Fixed Working Key (FWK) encryption.
- 'fpk' - The APEX will use Fixed Program Key (FPK) encryption. The APEX will not attempt to get EMMs.
- 'clear' - The APEX performs no encryption of output programs.
If the APEX is unable to encrypt programs in the configured mode, then those programs will not be mapped.
Once written, the change to this parameter will only take immediate effect after apexCteApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexCteApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexCteEncryptionMode?
Sets the CTE (Conditional Technical Encryption) encryption mode — such as full encryption — that is applied uniformly to all services across all QAMs on the device. This determines the level of content protection enforced at the output.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.1 snmpwalk -v2c -c public <target> APEX-MIB::apexCteEncryptionMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.1.1 snmpget -v2c -c public <target> APEX-MIB::apexCteEncryptionMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.20.1.2.1.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexCteEncryptionMode OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20 | apexEncryption | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1 | apexEncryptionConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2 | apexCteConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2.1 | apexCteEncryptionMode | APEX-MIB |