All MIBs › APEX-MIB › apexCteCitEnable
apexCteCitEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexCteCitEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.20.1.2.4
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Constrained Image Trigger (CIT) setting. If set to 'enabled' the settop box is notified not to allow a high quality digital output unless the receiving device also adheres to CIT processing. If the apexCteApsLevel is set to 'notDefined', the setting of the CIT value has no affect (CIT and APS are only used when APS is set to a defined value).
Once written, the change to this parameter will only take immediate effect after apexCteApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexCteApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexCteCitEnable?
Enables or disables the Constrained Image Trigger (CIT) flag in PRK messages, which tells set-top boxes to restrict high-quality digital outputs to devices that support CIT processing. When enabled alongside APS, it enforces premium content protection on digital outputs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.4 snmpwalk -v2c -c public <target> APEX-MIB::apexCteCitEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.4.1 snmpget -v2c -c public <target> APEX-MIB::apexCteCitEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.20.1.2.4.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexCteCitEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20 | apexEncryption | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1 | apexEncryptionConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2 | apexCteConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2.4 | apexCteCitEnable | APEX-MIB |