All MIBs › APEX-MIB › apexCteApsLevel
apexCteApsLevel
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexCteApsLevel
OID (numeric): 1.3.6.1.4.1.1166.1.31.20.1.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Analog Protection System (APS) Level setting for PRK messages. Defines what copy protection encoding will be applied to the analog composite output by the settop box. - notDefined - analog protection is not defined, settop box applications can configure APS - off - no analog protection - splitBurstOff - AGC on, split burst off - splitBurst2Line - AGC on, 2 line split burst on - splitBurst4Line - AGC on, 4 line split burst on
The APEX will set Tier Type based on apexCteApsLevel. The APEX will set tier type to subscription with right to tape when apexCteApsLevel is 'off' or 'notDefined'. The APEX will set tier type to subscription without right to tape when apexCteApsLevel is 'splitBurstOff', 'splitBurst2Line', or 'splitBurst4Line'.
Once written, the change to this parameter will only take immediate effect after apexCteApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexCteApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexCteApsLevel?
Configures the Analog Protection System (APS) level in PRK messages, instructing set-top boxes on what Macrovision-style copy-protection encoding to apply to their analog composite output. Higher levels add stronger anti-copy signals to the analog signal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.3 snmpwalk -v2c -c public <target> APEX-MIB::apexCteApsLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.20.1.2.3.1 snmpget -v2c -c public <target> APEX-MIB::apexCteApsLevel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.20.1.2.3.1 i <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexCteApsLevel OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20 | apexEncryption | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1 | apexEncryptionConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2 | apexCteConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.20.1.2.3 | apexCteApsLevel | APEX-MIB |