All MIBs › APEX-MIB › apexChassisRedundancySecondaryApexStatus
apexChassisRedundancySecondaryApexStatus
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexChassisRedundancySecondaryApexStatus
OID (numeric): 1.3.6.1.4.1.1166.1.31.22.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This parameter is applicable for an APEX where chassis redundancy is enabled.
The APEX configured as primary will report the following values: These are based on its knowledge about the secondary APEX from heartbeat messages.
unknown(0): State of secondary is not known (heartbeat not received). active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended.
The APEX configured as secondary will report the following values:
active(1): Secondary RF outputs are active. standby(2): Secondary RF outputs are muted. Waiting to become active. fault(3): Secondary has experienced a fault. suspend(4): Secondary is suspended.
What is apexChassisRedundancySecondaryApexStatus?
Reports the primary APEX's view of the secondary APEX's operational status, derived from received heartbeat messages. This helps operators understand the health and readiness of the backup unit from the primary's perspective.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.2.1.2 snmpwalk -v2c -c public <target> APEX-MIB::apexChassisRedundancySecondaryApexStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.2.1.2.1 snmpget -v2c -c public <target> APEX-MIB::apexChassisRedundancySecondaryApexStatus.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexChassisRedundancySecondaryApexStatus OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22 | apexChassisRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2 | apexChassisRedundancyStatus | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2.1 | apexChassisRedundancyStatusGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2.1.2 | apexChassisRedundancySecondaryApexStatus | APEX-MIB |