All MIBs › APEX-MIB › apexChassisRedundancyPrimaryApexStatus
apexChassisRedundancyPrimaryApexStatus
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexChassisRedundancyPrimaryApexStatus
OID (numeric): 1.3.6.1.4.1.1166.1.31.22.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This parameter is applicable for an APEX where chassis redundancy is enabled.
The APEX configured as primary will report the following values:
active(1): Primary RF outputs are active. standby(2): Primary RF outputs are muted. Waiting to become active. fault(3): Primary has experienced a fault. suspend(4): Primary is suspended.
The APEX configured as secondary will report the following values. These are based on its knowledge about the primary APEX from heartbeat messages.
unknown(0): State of primary is not known (heartbeat not received). active(1): Primary RF outputs are active. standby(2): Primary RF outputs are muted. Waiting to become active. fault(3): Primary has experienced a fault. suspend(4): Primary is suspended.
What is apexChassisRedundancyPrimaryApexStatus?
Reports the current operational status of the primary APEX in a chassis redundancy configuration, indicating whether its RF outputs are active or muted (standby). This allows operators to confirm which unit is actively carrying traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.2.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexChassisRedundancyPrimaryApexStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.2.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexChassisRedundancyPrimaryApexStatus.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexChassisRedundancyPrimaryApexStatus OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22 | apexChassisRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2 | apexChassisRedundancyStatus | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2.1 | apexChassisRedundancyStatusGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.2.1.1 | apexChassisRedundancyPrimaryApexStatus | APEX-MIB |