All MIBs › APEX-MIB › apexChassisRedundancyConfigEnable
apexChassisRedundancyConfigEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexChassisRedundancyConfigEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.22.1.1.1
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: This is to enable/disable APEX chassis redundancy. When set to disabled(1), APEX is not allowed to failover. When set to enabled(2), APEX can failover on its redundant APEX.
Once written, the change to this parameter will only take immediate effect after apexChassisRedundancyConfigApplyChange is set to 'apply'. In order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexChassisRedundancyConfigEnable?
Enables or disables chassis-level redundancy on the APEX device, controlling whether the unit is permitted to fail over to its redundant partner. When disabled, the device will not switch over even if a fault is detected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.1.1.1 snmpwalk -v2c -c public <target> APEX-MIB::apexChassisRedundancyConfigEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.22.1.1.1.1 snmpget -v2c -c public <target> APEX-MIB::apexChassisRedundancyConfigEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.22.1.1.1.1 s <value>
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexChassisRedundancyConfigEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22 | apexChassisRedundancy | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.1 | apexChassisRedundancyConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.1.1 | apexChassisRedundancyConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.22.1.1.1 | apexChassisRedundancyConfigEnable | APEX-MIB |