All MIBs › APEX-MIB › apexAutoRebootEnable
apexAutoRebootEnable
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexAutoRebootEnable
OID (numeric): 1.3.6.1.4.1.1166.1.31.1.1.1.4
Node type: OBJECT-TYPE
Type: EnableDisableTYPE
Access: read-write
Description: Setting to 'enabled' allows the APEX to automatically reboot when specific APEX hardware errors occur. Setting this to Enabled will cause the APEX to automatically reboot upon specific HW faults, such as a GigE processor crash, or upon a Host processor watchdog event. When disabled, HW faults and watchdog events will not cause an automatic reboot. This is useful when it is necessary to debug the event (to allow time to gather status prior to manually rebooting).
Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter.
@Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')
What is apexAutoRebootEnable?
Enables or disables the APEX device's automatic self-reboot behavior when specific hardware faults are detected, such as a GigE processor crash or host processor watchdog event. When enabled, the device can recover from certain hardware errors without manual intervention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.1.1.1.4 snmpwalk -v2c -c public <target> APEX-MIB::apexAutoRebootEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.1.1.1.4.1 snmpget -v2c -c public <target> APEX-MIB::apexAutoRebootEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.1.31.1.1.1.4.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> apexAutoRebootEnable.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexAutoRebootEnable OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.1 | apexSys | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.1.1 | apexSysConfig | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.1.1.1 | apexSysConfigGeneral | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.1.1.1.4 | apexAutoRebootEnable | APEX-MIB |