All MIBs › APEX-MIB › apexAlarmServiceInError
apexAlarmServiceInError
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexAlarmServiceInError
OID (numeric): 1.3.6.1.4.1.1166.1.31.100.8026
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Alarm Service In Error.
'major' indicates that one or more services is in error (unable to fully continue processing). However, this is only for very specific errors where the error could be caused by either the input stream being invalid or another command along with the input stream is causing the error. For example, if mapping an input service to an output and that PMT is not referenced in the PAT, or the number of PIDs in the PMT is greater than the number of PIDs supported, then the command is in error. This error condition would be cleared if a new PAT is received referencing the PMT or in the other case, if a new PMT is received referencing a valid number of PIDs.
Refer to apexOutputProgramRoutingStatus for more information.
This alarm occurs on the first error. It is not issued for additional errors. It is cleared when all errors are cleared.
What is apexAlarmServiceInError?
Signals a major alarm when one or more services encounter errors that prevent full processing, which may be caused by an invalid input stream or conflicting commands. This alarm helps distinguish service-level processing failures from physical layer issues.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.100.8026 snmpwalk -v2c -c public <target> APEX-MIB::apexAlarmServiceInError
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.100.8026.1 snmpget -v2c -c public <target> APEX-MIB::apexAlarmServiceInError.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexAlarmServiceInError OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.100 | apexAlarms | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.100.8026 | apexAlarmServiceInError | APEX-MIB |