All MIBs › APEX-MIB › apexAlarmHardwareFault
apexAlarmHardwareFault
Module: APEX-MIB
OID (symbolic): APEX-MIB::apexAlarmHardwareFault
OID (numeric): 1.3.6.1.4.1.1166.1.31.100.8000
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates that a Hardware related error occurred. Examples include missing or uncommunicative HW, failures in initialization of HW, and failures to configure HW. These can occur at startup or when the system is operational. Types of HW Faults include: Application File(s) Download failure; SPI Interface Initialization failure; PCI Interface Initialization failure; GigE Configuration failure; MUX Configuration failure; QAM Module Communication failure; Unsupported/Incorrect HW/FW Version (QAM, etc.); Fatal Host Firmware Exception.
'critical' indicates a fatal error occurred that prevents the APEX from performing operational requirements.
'warning' indicates an error that does not prevent the APEX from performing operational requirements.
What is apexAlarmHardwareFault?
Indicates that a hardware-related fault has been detected on the APEX device, such as a missing or unresponsive hardware component, an initialization failure, or a configuration error. This read-only alarm can be triggered both at startup and during normal operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.100.8000 snmpwalk -v2c -c public <target> APEX-MIB::apexAlarmHardwareFault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.1.31.100.8000.1 snmpget -v2c -c public <target> APEX-MIB::apexAlarmHardwareFault.1
Start monitoring BigBand Networks APEX video/broadband gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the APEX-MIB::apexAlarmHardwareFault OID value, configure state conditions and alerts, and monitor any BigBand Networks APEX video/broadband gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.1 | giproducts | BCS-IDENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | apex | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.100 | apexAlarms | APEX-MIB |
| 1.3.6.1.4.1.1166.1.31.100.8000 | apexAlarmHardwareFault | APEX-MIB |