All MIBs › ALCATEL-IND1-PORT-MIB › esmPortCfgPause
esmPortCfgPause
Module: ALCATEL-IND1-PORT-MIB
OID (symbolic): ALCATEL-IND1-PORT-MIB::esmPortCfgPause
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the default administrative PAUSE mode for this interface.
This object represents the administratively-configured PAUSE mode for this interface. If auto-negotiation is not enabled or is not implemented for the active MAU attached to this interface, the value of this object determines the operational PAUSE mode of the interface whenever it is operating in full-duplex mode. In this case, a set to this object will force the interface into the specified mode.
If auto-negotiation is implemented and enabled for the MAU attached to this interface, the PAUSE mode for this interface is determined by auto-negotiation, and the value of this object denotes the mode to which the interface will automatically revert if/when auto-negotiation is later disabled. For more information on what pause values will be autonegotiated based on settings on this object, please refer to the truth table in the users manual.
Note that the value of this object is ignored when the interface is not operating in full-duplex mode.
What is esmPortCfgPause?
Writable enum (disabled, enabledXmit, enabledRcv, enabledXmitRcv) configuring flow control (pause frames). Prevents packet loss under congestion. Example: enabledXmitRcv for bidirectional pausing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13 snmpwalk -v2c -c public <target> ALCATEL-IND1-PORT-MIB::esmPortCfgPause
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13.1 snmpget -v2c -c public <target> ALCATEL-IND1-PORT-MIB::esmPortCfgPause.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13.1 i <value>
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-PORT-MIB::esmPortCfgPause OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.5 | softentIND1Port | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.5.1 | alcatelIND1PortMIB | ALCATEL-IND1-PORT-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.5.1.1 | alcatelIND1PortMIBObjects | ALCATEL-IND1-PORT-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2 | physicalPort | ALCATEL-IND1-PORT-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1 | esmConfTable | ALCATEL-IND1-PORT-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1 | esmConfEntry | ALCATEL-IND1-PORT-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13 | esmPortCfgPause | ALCATEL-IND1-PORT-MIB |