All MIBs › ALCATEL-IND1-CHASSIS-MIB › chasEntPhysOperStatus
chasEntPhysOperStatus
Module: ALCATEL-IND1-CHASSIS-MIB
OID (symbolic): ALCATEL-IND1-CHASSIS-MIB::chasEntPhysOperStatus
OID (numeric): 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: All modules (even empty slots) are in unknown state when the chassis first powers up.
Chassis status possible value : up <=> powered up
Control Module possible value : notPresent <=> CM not present up <=> CM up and running down <=> CM down and powered secondary <=> CM in secondary mode and running
NI status possible value : notPresent <=> NI not present up <=> NI up and running down <=> NI down and powered unpowered <=> NI unpowered because there is not enough power in the system (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF (chasEntPhysAdminStatus = powerOff). This operational status has not full meaning without chasEntPhysAdminStatus
Fabric status possible value : master <=> up and acting as master up <=> up and acting as slave secondary <=> secondary mode for redundancy
Daughter board status possible value : notPresent <=> DB not present up <=> DB up and running down <=> DB down and powered
Power supply status possible value : up <=> PS up down <=> PS administratively down unpowered <=> PS not plugged in pwrsave <=> chassis in powersave mode, supply turned off
Fan Tray status possible value : up <=> powered up down <=> powered down fault <=> fault detected
What is chasEntPhysOperStatus?
Reports the current operational status of a physical entity in the chassis, such as whether a control module is up and running, not present, or in an unknown state. This read-only value reflects what the hardware is actually doing, as opposed to the administratively desired state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2 snmpwalk -v2c -c public <target> ALCATEL-IND1-CHASSIS-MIB::chasEntPhysOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2.1 snmpget -v2c -c public <target> ALCATEL-IND1-CHASSIS-MIB::chasEntPhysOperStatus.1
Start monitoring Alcatel/Alcatel-Lucent OmniSwitch chassis switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-CHASSIS-MIB::chasEntPhysOperStatus OID value, configure state conditions and alerts, and monitor any Alcatel/Alcatel-Lucent OmniSwitch chassis switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.1 | managementIND1Hardware | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.1.1 | hardwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.1.1.1 | hardentIND1Physical | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.1.1.1.1 | alcatelIND1ChassisPhysMIBObjects | ALCATEL-IND1-CHASSIS-MIB |
| 1.3.6.1.4.1.6486.801.1.1.1.1.1.1 | chasEntPhysicalTable | ALCATEL-IND1-CHASSIS-MIB |
| 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1 | chasEntPhysicalEntry | ALCATEL-IND1-CHASSIS-MIB |
| 1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2 | chasEntPhysOperStatus | ALCATEL-IND1-CHASSIS-MIB |