All MIBs › ALARM-MIB › alarmModelVarbindIndex
alarmModelVarbindIndex
Module: ALARM-MIB
OID (symbolic): ALARM-MIB::alarmModelVarbindIndex
OID (numeric): 1.3.6.1.2.1.118.1.1.2.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description:
The index into the varbind listing of the notification indicated by alarmModelNotificationId which helps signal that the given alarm has changed state. If there is no applicable varbind, the value of this object MUST be zero.
Note that the value of alarmModelVarbindIndex acknowledges the existence of the first two obligatory varbinds in the InformRequest-PDU and SNMPv2-Trap-PDU (sysUpTime.0 and snmpTrapOID.0). That is, a value of 2 refers to the snmpTrapOID.0.
If the incoming notification is instead an SNMPv1 Trap-PDU, then an appropriate value for sysUpTime.0 or snmpTrapOID.0 shall be determined by using the rules in section 3.1 of [RFC3584]
What is alarmModelVarbindIndex?
Identifies which variable binding (by position) within a notification's varbind list signals that a specific alarm has changed state. A value of zero indicates that no particular varbind in the notification is designated for alarm state signaling.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.118 | alarmMIB | ALARM-MIB |
| 1.3.6.1.2.1.118.1 | alarmObjects | ALARM-MIB |
| 1.3.6.1.2.1.118.1.1 | alarmModel | ALARM-MIB |
| 1.3.6.1.2.1.118.1.1.2 | alarmModelTable | ALARM-MIB |
| 1.3.6.1.2.1.118.1.1.2.1 | alarmModelEntry | ALARM-MIB |
| 1.3.6.1.2.1.118.1.1.2.1.4 | alarmModelVarbindIndex | ALARM-MIB |