All MIBs › AIRESPACE-SWITCHING-MIB › agentPortType
agentPortType
Module: AIRESPACE-SWITCHING-MIB
OID (symbolic): AIRESPACE-SWITCHING-MIB::agentPortType
OID (numeric): 1.3.6.1.4.1.14179.1.2.12.1.12
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-only
Description: This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA.
If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object qbEnetDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object qbEnetPortDefaultType will force the MAU into the new operating mode.
The valid values for this object are:
dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
What is agentPortType?
This read-only OBJECT IDENTIFIER reports the currently active port type. References standard MAU OID tree to indicate speed/duplex. Used for port capability discovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.1.2.12.1.12 snmpwalk -v2c -c public <target> AIRESPACE-SWITCHING-MIB::agentPortType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.1.2.12.1.12.1 snmpget -v2c -c public <target> AIRESPACE-SWITCHING-MIB::agentPortType.1
Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-SWITCHING-MIB::agentPortType OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14179 | airespace | AIRESPACE-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14179.1 | bsnSwitching | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2 | agentConfigGroup | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12 | agentPortConfigTable | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12.1 | agentPortConfigEntry | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12.1.12 | agentPortType | AIRESPACE-SWITCHING-MIB |