All MIBs › AIRESPACE-SWITCHING-MIB › agentPortDefaultType
agentPortDefaultType
Module: AIRESPACE-SWITCHING-MIB
OID (symbolic): AIRESPACE-SWITCHING-MIB::agentPortDefaultType
OID (numeric): 1.3.6.1.4.1.14179.1.2.12.1.11
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-write
Description: This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType.
The set of possible values for this object is the same as the set defined for the agentPortType object.
This object represents the administratively- configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.
The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
What is agentPortDefaultType?
This read-write OBJECT IDENTIFIER sets the administratively-configured port type/speed default (MAU profile). Controls auto-negotiation preferences. Complex; typically set via factory defaults.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14179.1.2.12.1.11 snmpwalk -v2c -c public <target> AIRESPACE-SWITCHING-MIB::agentPortDefaultType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14179.1.2.12.1.11.1 snmpget -v2c -c public <target> AIRESPACE-SWITCHING-MIB::agentPortDefaultType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.14179.1.2.12.1.11.1 s <value>
Start monitoring Cisco (Airespace) Wireless LAN Controllers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AIRESPACE-SWITCHING-MIB::agentPortDefaultType OID value, configure state conditions and alerts, and monitor any Cisco (Airespace) Wireless LAN Controllers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14179 | airespace | AIRESPACE-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14179.1 | bsnSwitching | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2 | agentConfigGroup | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12 | agentPortConfigTable | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12.1 | agentPortConfigEntry | AIRESPACE-SWITCHING-MIB |
| 1.3.6.1.4.1.14179.1.2.12.1.11 | agentPortDefaultType | AIRESPACE-SWITCHING-MIB |