All MIBs › ADSL-LINE-MIB › adslAturCurrStatus
adslAturCurrStatus
Module: ADSL-LINE-MIB
OID (symbolic): ADSL-LINE-MIB::adslAturCurrStatus
OID (numeric): 1.3.6.1.2.1.10.94.1.1.3.1.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description:
Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are:
0 noDefect There no defects on the line
1 lossOfFraming ATUR failure due to not receiving valid frame
2 lossOfSignal ATUR failure due to not receiving signal
3 lossOfPower ATUR failure due to loss of power
4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7.
This is intended to supplement ifOperStatus.
What is adslAturCurrStatus?
This OID reports the operational status of the remote ATUR line as a bitmap of error or fault conditions present on the customer-side equipment. Engineers use this to diagnose problems at the remote site, though some faults may not be detectable due to the isolation of remote equipment. If bit 1 is set, it indicates loss of framing, meaning the customer's modem lost synchronization with incoming data.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.3.1.6 snmpwalk -v2c -c public <target> ADSL-LINE-MIB::adslAturCurrStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.3.1.6.1 snmpget -v2c -c public <target> ADSL-LINE-MIB::adslAturCurrStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.94 | adslMIB | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1 | adslLineMib | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1 | adslMibObjects | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.3 | adslAturPhysTable | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.3.1 | adslAturPhysEntry | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.3.1.6 | adslAturCurrStatus | ADSL-LINE-MIB |