ADSL-LINE-MIB :: adslAturChanPerfValidIntervals

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBs › ADSL-LINE-MIB › adslAturChanPerfValidIntervals

adslAturChanPerfValidIntervals

Module: ADSL-LINE-MIB

OID (symbolic): ADSL-LINE-MIB::adslAturChanPerfValidIntervals

OID (numeric): 1.3.6.1.2.1.10.94.1.1.11.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.

What is adslAturChanPerfValidIntervals?

This OID shows how many of the last 96 possible 15-minute measurement windows the modem actually collected data for, ranging from 0 to 96. Engineers check this to know whether performance statistics are based on a full day of data or only a partial window after a reboot. A value of 72 means only 18 hours of the last 24 hours have valid data, so yesterday's statistics are incomplete.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.11.1.5
snmpwalk -v2c -c public <target> ADSL-LINE-MIB::adslAturChanPerfValidIntervals

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.11.1.5.1
snmpget -v2c -c public <target> ADSL-LINE-MIB::adslAturChanPerfValidIntervals.1

Start monitoring ADSL DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL-LINE-MIB::adslAturChanPerfValidIntervals OID value, configure state conditions and alerts, and monitor any ADSL DSLAMs and CPE modems from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.94adslMIBADSL-LINE-MIB
1.3.6.1.2.1.10.94.1adslLineMibADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1adslMibObjectsADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.11adslAturChanPerfDataTableADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.11.1adslAturChanPerfDataEntryADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.11.1.5adslAturChanPerfValidIntervalsADSL-LINE-MIB

Module

This MIB depends on