All MIBs › ADSL-LINE-MIB › adslAturChanConfMaxInterleaveDelay
adslAturChanConfMaxInterleaveDelay
Module: ADSL-LINE-MIB
OID (symbolic): ADSL-LINE-MIB::adslAturChanConfMaxInterleaveDelay
OID (numeric): 1.3.6.1.2.1.10.94.1.1.14.1.29
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
What is adslAturChanConfMaxInterleaveDelay?
This OID stores a value from 0 to 255 controlling byte spacing in the interleaved channel bit stream on the ATUR side to improve error correction. Network engineers adjust this to balance impulse noise protection against latency, with higher values providing better protection at the cost of added delay. Setting this to 32 provides strong noise immunity for lines subject to electrical interference.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.94 | adslMIB | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1 | adslLineMib | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1 | adslMibObjects | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14 | adslLineConfProfileTable | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14.1 | adslLineConfProfileEntry | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14.1.29 | adslAturChanConfMaxInterleaveDelay | ADSL-LINE-MIB |