All MIBs › ADSL-LINE-MIB › adslAtucIntervalLols
adslAtucIntervalLols
Module: ADSL-LINE-MIB
OID (symbolic): ADSL-LINE-MIB::adslAtucIntervalLols
OID (numeric): 1.3.6.1.2.1.10.94.1.1.8.1.4
Node type: OBJECT-TYPE
Type: PerfIntervalCount
Access: read-only
Description:
Count of seconds in the interval when there was Loss of Link.
What is adslAtucIntervalLols?
This OID counts Loss of Link events during the current interval, where the entire data link layer fails and communication stops completely. This is more severe than signal loss because it represents a total protocol failure, not just signal degradation. If this counter reaches 3 in a single interval, the line is experiencing severe instability and will likely fail if the root cause isn't fixed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.8.1.4 snmpwalk -v2c -c public <target> ADSL-LINE-MIB::adslAtucIntervalLols
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.8.1.4.1 snmpget -v2c -c public <target> ADSL-LINE-MIB::adslAtucIntervalLols.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.94 | adslMIB | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1 | adslLineMib | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1 | adslMibObjects | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.8 | adslAtucIntervalTable | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.8.1 | adslAtucIntervalEntry | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.8.1.4 | adslAtucIntervalLols | ADSL-LINE-MIB |