All MIBs › ADSL-LINE-MIB › adslAtucCurrOutputPwr
adslAtucCurrOutputPwr
Module: ADSL-LINE-MIB
OID (symbolic): ADSL-LINE-MIB::adslAtucCurrOutputPwr
OID (numeric): 1.3.6.1.2.1.10.94.1.1.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.
What is adslAtucCurrOutputPwr?
This OID stores the total output power transmitted by the ATUC, measured in tenths of a dBm and ranging from -310 to 310. Network engineers monitor this to ensure the central office modem is transmitting at appropriate power levels to reach the customer without causing interference. A value of 130 means 13 dBm of transmit power, which is typical for central office equipment pushing signal down the line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.2.1.7 snmpwalk -v2c -c public <target> ADSL-LINE-MIB::adslAtucCurrOutputPwr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.2.1.7.1 snmpget -v2c -c public <target> ADSL-LINE-MIB::adslAtucCurrOutputPwr.1
Start monitoring ADSL DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL-LINE-MIB::adslAtucCurrOutputPwr OID value, configure state conditions and alerts, and monitor any ADSL DSLAMs and CPE modems from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.94 | adslMIB | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1 | adslLineMib | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1 | adslMibObjects | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.2 | adslAtucPhysTable | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.2.1 | adslAtucPhysEntry | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.2.1.7 | adslAtucCurrOutputPwr | ADSL-LINE-MIB |