All MIBs › ADSL-LINE-MIB › adslAtucConfMaxSnrMgn
adslAtucConfMaxSnrMgn
Module: ADSL-LINE-MIB
OID (symbolic): ADSL-LINE-MIB::adslAtucConfMaxSnrMgn
OID (numeric): 1.3.6.1.2.1.10.94.1.1.14.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
What is adslAtucConfMaxSnrMgn?
This OID sets the maximum acceptable Signal-to-Noise Margin in 0.1 dB units above which the modem reduces its transmit power to save energy. Network operators configure this to prevent the modem from wasting power when conditions are unusually good. A value of 300 (representing 30 dB) tells the modem to back off if the margin exceeds this, reducing electromagnetic interference.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.94 | adslMIB | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1 | adslLineMib | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1 | adslMibObjects | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14 | adslLineConfProfileTable | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14.1 | adslLineConfProfileEntry | ADSL-LINE-MIB |
| 1.3.6.1.2.1.10.94.1.1.14.1.5 | adslAtucConfMaxSnrMgn | ADSL-LINE-MIB |