ADSL-LINE-MIB :: adslAtucChanPerfValidIntervals

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBs › ADSL-LINE-MIB › adslAtucChanPerfValidIntervals

adslAtucChanPerfValidIntervals

Module: ADSL-LINE-MIB

OID (symbolic): ADSL-LINE-MIB::adslAtucChanPerfValidIntervals

OID (numeric): 1.3.6.1.2.1.10.94.1.1.10.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.

What is adslAtucChanPerfValidIntervals?

This counter shows how many previous 15-minute measurement windows have complete performance data available (ranges from 0 to 96 intervals). Network engineers use this to understand how much historical trend data exists and whether a sufficiently large sample size is available for accurate SLA reporting. A value of 96 after 24 hours means a full day of unbroken metrics is available; a value of 2 right after startup means only 30 minutes of history exists.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.10.1.5
snmpwalk -v2c -c public <target> ADSL-LINE-MIB::adslAtucChanPerfValidIntervals

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.94.1.1.10.1.5.1
snmpget -v2c -c public <target> ADSL-LINE-MIB::adslAtucChanPerfValidIntervals.1

Start monitoring ADSL DSLAMs and CPE modems with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADSL-LINE-MIB::adslAtucChanPerfValidIntervals OID value, configure state conditions and alerts, and monitor any ADSL DSLAMs and CPE modems from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.94adslMIBADSL-LINE-MIB
1.3.6.1.2.1.10.94.1adslLineMibADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1adslMibObjectsADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.10adslAtucChanPerfDataTableADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.10.1adslAtucChanPerfDataEntryADSL-LINE-MIB
1.3.6.1.2.1.10.94.1.1.10.1.5adslAtucChanPerfValidIntervalsADSL-LINE-MIB

Module

This MIB depends on