ACE20-MIB :: atmSuPortFrLportVCSigProcedure

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACE20-MIBatmSuPortFrLportVCSigProcedure

atmSuPortFrLportVCSigProcedure

Module: ACE20-MIB

OID (symbolic): ACE20-MIB::atmSuPortFrLportVCSigProcedure

OID (numeric): 1.3.6.1.4.1.164.12.4.2.4.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value of this object identifies the Local In-Channel Signaling Procedure that is used for this UNI/NNI logical port. The UNI/NNI logical port can be performing user-to-network network-side and user-to-network user-side procedures or bidirectional procedures. this parameter gets value 'notApplicable when the VCSigProtocol is none

What is atmSuPortFrLportVCSigProcedure?

This OID specifies the signaling procedure (such as user-to-network or bidirectional) used on this Frame Relay UNI/NNI port to negotiate circuit establishment with the network. The configuration determines whether the device acts as user equipment, network equipment, or both when exchanging signaling messages with the Frame Relay network. For example, a value of 'userToNetworkUserSide' means the device acts as user equipment receiving service from a Frame Relay network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.12.4.2.4.1.1.4
snmpwalk -v2c -c public <target> ACE20-MIB::atmSuPortFrLportVCSigProcedure

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.12.4.2.4.1.1.4.1
snmpget -v2c -c public <target> ACE20-MIB::atmSuPortFrLportVCSigProcedure.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.164.12.4.2.4.1.1.4.1 i <value>

Start monitoring Nortel ACE 20 ATM concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACE20-MIB::atmSuPortFrLportVCSigProcedure OID value, configure state conditions and alerts, and monitor any Nortel ACE 20 ATM concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.12radAtmRAD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.12.4atmSuACE20-MIB
1.3.6.1.4.1.164.12.4.2atmSuPortACE20-MIB
1.3.6.1.4.1.164.12.4.2.4atmSuPortFrACE20-MIB
1.3.6.1.4.1.164.12.4.2.4.1atmSuPortFrLportTableACE20-MIB
1.3.6.1.4.1.164.12.4.2.4.1.1atmSuPortFrLportEntryACE20-MIB
1.3.6.1.4.1.164.12.4.2.4.1.1.4atmSuPortFrLportVCSigProcedureACE20-MIB