ACE20-MIB :: atmCbrCnfgAtmIfIndex

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsACE20-MIBatmCbrCnfgAtmIfIndex

atmCbrCnfgAtmIfIndex

Module: ACE20-MIB

OID (symbolic): ACE20-MIB::atmCbrCnfgAtmIfIndex

OID (numeric): 1.3.6.1.4.1.164.12.4.3.3.1.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The ifIndex associated to the ATM interface.

What is atmCbrCnfgAtmIfIndex?

This OID stores which ATM interface is used by this Constant Bit Rate (CBR) connection, referenced by its interface index. Operators need this to identify which physical ATM port carries CBR traffic when reviewing configurations. A value of 2 means the CBR connection uses the ATM interface at index position 2 on the device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.164.12.4.3.3.1.1.1
snmpwalk -v2c -c public <target> ACE20-MIB::atmCbrCnfgAtmIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.164.12.4.3.3.1.1.1.1
snmpget -v2c -c public <target> ACE20-MIB::atmCbrCnfgAtmIfIndex.1

Start monitoring Nortel ACE 20 ATM concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACE20-MIB::atmCbrCnfgAtmIfIndex OID value, configure state conditions and alerts, and monitor any Nortel ACE 20 ATM concentrator (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.164radDACS-MIB
1.3.6.1.4.1.164.12radAtmRAD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.164.12.4atmSuACE20-MIB
1.3.6.1.4.1.164.12.4.3atmSuCrossConnectACE20-MIB
1.3.6.1.4.1.164.12.4.3.3atmSuAtmCbrACE20-MIB
1.3.6.1.4.1.164.12.4.3.3.1atmCbrCnfgTableACE20-MIB
1.3.6.1.4.1.164.12.4.3.3.1.1atmCbrCnfgEntryACE20-MIB
1.3.6.1.4.1.164.12.4.3.3.1.1.1atmCbrCnfgAtmIfIndexACE20-MIB