ACC-XNS :: accXnsRteFltrApplPktDir

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-XNSaccXnsRteFltrApplPktDir

accXnsRteFltrApplPktDir

Module: ACC-XNS

OID (symbolic): ACC-XNS::accXnsRteFltrApplPktDir

OID (numeric): 1.3.6.1.4.1.5.1.1.21.12.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Traffic direction to which the IDP Route filter is applied

What is accXnsRteFltrApplPktDir?

This read-only OID displays which traffic direction (inbound or outbound) the filter is actively applied to on its assigned interface. Network engineers check this to confirm the filter's direction matches the intended security policy. Example: A value of 'inbound(1)' confirms the filter is inspecting only incoming traffic on that interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.12.3.1.2
snmpwalk -v2c -c public <target> ACC-XNS::accXnsRteFltrApplPktDir

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.12.3.1.2.1
snmpget -v2c -c public <target> ACC-XNS::accXnsRteFltrApplPktDir.1

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-XNS::accXnsRteFltrApplPktDir OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.21accXnsACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.21.12accXnsNamedRteFiltersACC-XNS
1.3.6.1.4.1.5.1.1.21.12.3accXnsRteFltrApplTableACC-XNS
1.3.6.1.4.1.5.1.1.21.12.3.1accXnsRteFltrApplEntryACC-XNS
1.3.6.1.4.1.5.1.1.21.12.3.1.2accXnsRteFltrApplPktDirACC-XNS