All MIBs › ACC-XNS › accXnsNetUbQT2
accXnsNetUbQT2
Module: ACC-XNS
OID (symbolic): ACC-XNS::accXnsNetUbQT2
OID (numeric): 1.3.6.1.4.1.5.1.1.21.2.1.20
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description:
Ungermann-Bass QT2 timer Object will be defaulted to a network type dependent value if missing in set PDU which adds entries. This object may be individually adjusted
What is accXnsNetUbQT2?
This object stores the QT2 timer value for Ungermann-Bass protocol retry intervals and can be individually adjusted per network (measured in deciseconds). Network engineers fine-tune it to optimize protocol behavior—longer values reduce retransmission but increase latency, while shorter values speed recovery but increase traffic. For example, setting it to 2000 creates a 20-second interval between retries.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.2.1.20 snmpwalk -v2c -c public <target> ACC-XNS::accXnsNetUbQT2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.2.1.20.1 snmpget -v2c -c public <target> ACC-XNS::accXnsNetUbQT2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.21.2.1.20.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21 | accXns | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21.2 | accXnsNetTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21.2.1 | accXnsNetEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21.2.1.20 | accXnsNetUbQT2 | ACC-XNS |