All MIBs › ACC-XNS › accXnsNamedRteFltrPktDir
accXnsNamedRteFltrPktDir
Module: ACC-XNS
OID (symbolic): ACC-XNS::accXnsNamedRteFltrPktDir
OID (numeric): 1.3.6.1.4.1.5.1.1.21.12.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Traffic direction to which the filter is applied
What is accXnsNamedRteFltrPktDir?
This OID defines the direction of traffic—inbound or outbound—that the route filter will apply to. Network engineers configure this to specify whether the filter should inspect traffic entering or leaving the network. Example: Setting the value to 'inbound(1)' means the filter only checks packets arriving at the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.12.2.1.7 snmpwalk -v2c -c public <target> ACC-XNS::accXnsNamedRteFltrPktDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.21.12.2.1.7.1 snmpget -v2c -c public <target> ACC-XNS::accXnsNamedRteFltrPktDir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.21.12.2.1.7.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21 | accXns | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.21.12 | accXnsNamedRteFilters | ACC-XNS |
| 1.3.6.1.4.1.5.1.1.21.12.2 | accXnsNamedRteFltrTable | ACC-XNS |
| 1.3.6.1.4.1.5.1.1.21.12.2.1 | accXnsNamedRteFltrEntry | ACC-XNS |
| 1.3.6.1.4.1.5.1.1.21.12.2.1.7 | accXnsNamedRteFltrPktDir | ACC-XNS |