All MIBs › ACC-ISDN › accIsdnxTermination
accIsdnxTermination
Module: ACC-ISDN
OID (symbolic): ACC-ISDN::accIsdnxTermination
OID (numeric): 1.3.6.1.4.1.5.1.1.36.10.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: ISDN Bus Termination status
What is accIsdnxTermination?
This OID controls whether the ISDN bus termination is enabled or disabled on this interface. Network engineers toggle this setting when installing new ISDN equipment or removing devices from the end of the bus chain. For example, if you're the last device on the line, set this to "enabled" to prevent signal reflections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.10.1 snmpwalk -v2c -c public <target> ACC-ISDN::accIsdnxTermination
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.36.10.1.1 snmpget -v2c -c public <target> ACC-ISDN::accIsdnxTermination.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.36.10.1.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-ISDN::accIsdnxTermination OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.36 | accIsdn | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.10 | accIsdnTerm | ACC-ISDN |
| 1.3.6.1.4.1.5.1.1.36.10.1 | accIsdnxTermination | ACC-ISDN |