ACC-DS3 :: accDs3InfcRxMdlPort

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ACC-DS3 › accDs3InfcRxMdlPort

accDs3InfcRxMdlPort

Module: ACC-DS3

OID (symbolic): ACC-DS3::accDs3InfcRxMdlPort

OID (numeric): 1.3.6.1.4.1.5.1.1.79.1.18

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: The remote MDL port identification code for the DS3 interface. Describes port on the equipment that will initiate the idle signal.

What is accDs3InfcRxMdlPort?

This OID specifies the receive port on the far-end equipment that will send idle test signals during DS3 diagnostics, as reported by the remote device. Engineers monitor this read-only value to understand bidirectional signal flow and verify both ends agree on test port assignments. An example port like "RX-PORT-1" or "MDL-2" tells you the far end will send test signals from that specific receiver port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.18
snmpwalk -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.18.1
snmpget -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlPort.1

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-DS3::accDs3InfcRxMdlPort OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.79accDs3InfcTableACC-DS3
1.3.6.1.4.1.5.1.1.79.1accDs3InfcEntryACC-DS3
1.3.6.1.4.1.5.1.1.79.1.18accDs3InfcRxMdlPortACC-DS3