ACC-DS3 DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Counter FROM RFC1155-SMI accTrapLogSeqNum FROM ACC-SYSTEM accBRG, DisplayString, RowStatus, IfIndex, SmdsAddress FROM ACC-MIB; -- DS3/E3 Interface -- the DS3/E3 Interface accDs3InfcTable OBJECT-TYPE SYNTAX SEQUENCE OF AccDs3InfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " The DS3 interface table." ::= { accBRG 79 } accDs3InfcEntry OBJECT-TYPE SYNTAX AccDs3InfcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " An entry in the DS3 interface table." INDEX { accDs3InfcServiceState } ::= { accDs3InfcTable 1 } AccDs3InfcEntry ::= SEQUENCE { accDs3InfcServiceState INTEGER, accDs3InfcLoopbackOp INTEGER, accDs3InfcLoopbackCO INTEGER, accDs3InfcLineLength INTEGER, accDs3InfcMdlProtocol INTEGER, accDs3InfcTxMdlEic DisplayString, accDs3InfcTxMdlLic DisplayString, accDs3InfcTxMdlFic DisplayString, accDs3InfcTxMdlUnit DisplayString, accDs3InfcTxMdlFac DisplayString, accDs3InfcTxMdlPort DisplayString, accDs3InfcTxMdlGen DisplayString, accDs3InfcRxMdlPathAges Counter, accDs3InfcRxMdlIdleAges Counter, accDs3InfcRxMdlTestAges Counter, accDs3InfcRxMdlEic DisplayString, accDs3InfcRxMdlLic DisplayString, accDs3InfcRxMdlFic DisplayString, accDs3InfcRxMdlUnit DisplayString, accDs3InfcRxMdlFac DisplayString, accDs3InfcRxMdlPort DisplayString, accDs3InfcRxMdlGen DisplayString } accDs3InfcServiceState OBJECT-TYPE SYNTAX INTEGER { ds3InfcInService(1), ds3InfcOutOfServer(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates DS3 interface service state. Certain attributes require that the service state be in a certain state before they can be altered." ::= { accDs3InfcEntry 1 } accDs3InfcLoopbackOp OBJECT-TYPE SYNTAX INTEGER { accDs3NoInfcLoop(1), accDs3PaybackLoop(2), accDs3InfcLineLoop(3), accDs3InfcEquipLoop(4), ds1loop-1(33), ds1loop-2(34), ds1loop-3(35), ds1loop-4(36), ds1loop-5(37), ds1loop-6(38), ds1loop-7(39), ds1loop-8(40), ds1loop-9(41), ds1loop-10(42), ds1loop-11(43), ds1loop-12(44), ds1loop-13(45), ds1loop-14(46), ds1loop-15(47), ds1loop-16(48), ds1loop-17(49), ds1loop-18(50), ds1loop-19(51), ds1loop-20(52), ds1loop-21(53), ds1loop-22(54), ds1loop-23(55), ds1loop-24(56), ds1loop-25(57), ds1loop-26(58), ds1loop-27(59), ds1loop-28(60) } ACCESS read-write STATUS mandatory DESCRIPTION "The local loopback mode of a DS3 interface. The entire DS3 line can be set or each individual DS1 line within the DS3 can be set separately." ::= { accDs3InfcEntry 2 } accDs3InfcLoopbackCO OBJECT-TYPE SYNTAX INTEGER { accDs3NoLoop(1), accDs3DS1LoopAll(19), accDs3LineLoop(27), ds1loop-1(33), ds1loop-2(34), ds1loop-3(35), ds1loop-4(36), ds1loop-5(37), ds1loop-6(38), ds1loop-7(39), ds1loop-8(40), ds1loop-9(41), ds1loop-10(42), ds1loop-11(43), ds1loop-12(44), ds1loop-13(45), ds1loop-14(46), ds1loop-15(47), ds1loop-16(48), ds1loop-17(49), ds1loop-18(50), ds1loop-19(51), ds1loop-20(52), ds1loop-21(53), ds1loop-22(54), ds1loop-23(55), ds1loop-24(56), ds1loop-25(57), ds1loop-26(58), ds1loop-27(59), ds1loop-28(60) } ACCESS read-only STATUS mandatory DESCRIPTION "The loopback state of a DS3 interface when loopback is initiated remotely. A DS3 line can be set, or individual DS1 lines within the DS3 can be set separately." ::= { accDs3InfcEntry 3 } accDs3InfcLineLength OBJECT-TYPE SYNTAX INTEGER { ds3ShortLine(1), --0..133 feet ds3LongLine(2) --133..655 feet } ACCESS read-write STATUS mandatory DESCRIPTION " The approximate line length. The default is short. " ::= { accDs3InfcEntry 4 } accDs3InfcMdlProtocol OBJECT-TYPE SYNTAX INTEGER { ds3Ansi(1), ds3NoProtocol(2) } ACCESS read-write STATUS mandatory DESCRIPTION " The terminal to terminal path maintenance data link protocol of the DS3 interface. " ::= { accDs3InfcEntry 5 } accDs3InfcTxMdlEic OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL equipment identification code for the DS3 interface. Describes the equipment." ::= { accDs3InfcEntry 6 } accDs3InfcTxMdlLic OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL location identification code for the DS3 interface. Describes specific location of the equipment." ::= { accDs3InfcEntry 7 } accDs3InfcTxMdlFic OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL frame identification code for the DS3 interface. Identifies where the specific piece of equipment is located in a building" ::= { accDs3InfcEntry 8 } accDs3InfcTxMdlUnit OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay." ::= { accDs3InfcEntry 9 } accDs3InfcTxMdlFac OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL facility identification code for the DS3 interface. Describes a specific DS3 path. " ::= { accDs3InfcEntry 10 } accDs3InfcTxMdlPort OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL port identification code for the DS3 interface. Describes port on the equipment that will initiate the idle signal. " ::= { accDs3InfcEntry 11 } accDs3InfcTxMdlGen OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION " The local MDL generator number for the DS3 interface. Describes the signal generator that will initiate the test signal." ::= { accDs3InfcEntry 12 } accDs3InfcRxMdlEic OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL equipment identification code for the DS3 interface. Describes the equipment." ::= { accDs3InfcEntry 13 } accDs3InfcRxMdlLic OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL location identification code for the DS3 interface. Describes specific location of the equipment." ::= { accDs3InfcEntry 14 } accDs3InfcRxMdlFic OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL frame identification code for the DS3 interface. Identifies where the specific piece of equipment is located in a building" ::= { accDs3InfcEntry 15 } accDs3InfcRxMdlUnit OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay." ::= { accDs3InfcEntry 16 } accDs3InfcRxMdlFac OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay." ::= { accDs3InfcEntry 17 } accDs3InfcRxMdlPort OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL port identification code for the DS3 interface. Describes port on the equipment that will initiate the idle signal. " ::= { accDs3InfcEntry 18 } accDs3InfcRxMdlGen OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION " The remote MDL generator number for the DS3 interface. Describes the signal generator that will initiate the test signal." ::= { accDs3InfcEntry 19 } accDs3InfcRxMdlPathAges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { accDs3InfcEntry 20 } accDs3InfcRxMdlIdleAges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { accDs3InfcEntry 21 } accDs3InfcRxMdlTestAges OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { accDs3InfcEntry 22 } END