ACC-DS3 :: accDs3InfcRxMdlGen

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ACC-DS3 › accDs3InfcRxMdlGen

accDs3InfcRxMdlGen

Module: ACC-DS3

OID (symbolic): ACC-DS3::accDs3InfcRxMdlGen

OID (numeric): 1.3.6.1.4.1.5.1.1.79.1.19

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: The remote MDL generator number for the DS3 interface. Describes the signal generator that will initiate the test signal.

What is accDs3InfcRxMdlGen?

This OID identifies which signal generator on the remote end will produce test signals, as reported by the far-side device in its maintenance messages. Monitoring this read-only value helps engineers understand remote diagnostic capabilities and which generator will originate far-end test traffic. A value like "GEN-B" or "TEST-GENERATOR-2" indicates the remote device will use that generator for loopback or pattern testing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.19
snmpwalk -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlGen

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.19.1
snmpget -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlGen.1

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-DS3::accDs3InfcRxMdlGen OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.79accDs3InfcTableACC-DS3
1.3.6.1.4.1.5.1.1.79.1accDs3InfcEntryACC-DS3
1.3.6.1.4.1.5.1.1.79.1.19accDs3InfcRxMdlGenACC-DS3