All MIBs › ACC-DS3 › accDs3InfcRxMdlEic
accDs3InfcRxMdlEic
Module: ACC-DS3
OID (symbolic): ACC-DS3::accDs3InfcRxMdlEic
OID (numeric): 1.3.6.1.4.1.5.1.1.79.1.13
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The remote MDL equipment identification code for the DS3 interface. Describes the equipment.
What is accDs3InfcRxMdlEic?
This OID displays the equipment identification code (EIC) received from the remote end of the DS3 link, describing what device is on the far side. You monitor this read-only value to verify that both ends recognize each other correctly, a basic sanity check for link establishment. An example value like "ACC-DS3-RX-24" tells you the far end has a DS3 receiver in slot 24.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.13 snmpwalk -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlEic
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.79.1.13.1 snmpget -v2c -c public <target> ACC-DS3::accDs3InfcRxMdlEic.1
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-DS3::accDs3InfcRxMdlEic OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.79 | accDs3InfcTable | ACC-DS3 |
| 1.3.6.1.4.1.5.1.1.79.1 | accDs3InfcEntry | ACC-DS3 |
| 1.3.6.1.4.1.5.1.1.79.1.13 | accDs3InfcRxMdlEic | ACC-DS3 |