All MIBs › AC-SYSTEM-MIB › acSysDiagnosticsEnable
acSysDiagnosticsEnable
Module: AC-SYSTEM-MIB
OID (symbolic): AC-SYSTEM-MIB::acSysDiagnosticsEnable
OID (numeric): 1.3.6.1.4.1.5003.9.10.10.1.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Checks the correct functionality of the different hardware components on the board. On completion of the check, the board sends an EV_END_BIT value, which contains information on the test results of each hardware component.
0 = No diagnostics (default) 1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY and Flash) 2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, PHY, but partial, test of Flash, a quicker mode). Access: Offline. AC INI-Param: ENABLEDIAGNOSTICS
What is acSysDiagnosticsEnable?
This OID triggers hardware self-tests on the device, with options: 0 for disabled, 1 for full test (DSPs, PCM, switch, LAN, PHY, flash), or 2 for quick test (skips full flash test). An engineer enables this during commissioning or after hardware repairs to verify all components (processors, memory, network) are functioning correctly. Setting it to 1 runs a complete test and the device sends back results indicating which components passed or failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.4.1.1 snmpwalk -v2c -c public <target> AC-SYSTEM-MIB::acSysDiagnosticsEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.4.1.1.1 snmpget -v2c -c public <target> AC-SYSTEM-MIB::acSysDiagnosticsEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.10.1.4.1.1.1 i <value>
Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-SYSTEM-MIB::acSysDiagnosticsEnable OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways/media servers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.10 | acSystem | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1 | acSystemConfiguration | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.4 | acSysMiscConfig | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.4.1 | acSysDiagnostics | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.4.1.1 | acSysDiagnosticsEnable | AC-SYSTEM-MIB |