AC-SYSTEM-MIB :: acSysActionSetResetControl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsAC-SYSTEM-MIBacSysActionSetResetControl

acSysActionSetResetControl

Module: AC-SYSTEM-MIB

OID (symbolic): AC-SYSTEM-MIB::acSysActionSetResetControl

OID (numeric): 1.3.6.1.4.1.5003.9.10.10.3.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines the remote reset action. 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload. Access: Instant. AC INI-Param: RemoteResetControl

What is acSysActionSetResetControl?

This write-enabled control determines how the system behaves during a remote reset: whether to burn staged images to flash, use flash, or boot from BOOTP/TFTP. An administrator uses this to orchestrate firmware upgrades and configuration deployment during system restarts. For example, setting this to 1 burns any staged firmware image and configuration to flash before rebooting, while setting it to 3 forces a network boot and ignores saved firmware.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.3.1.1.2
snmpwalk -v2c -c public <target> AC-SYSTEM-MIB::acSysActionSetResetControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.3.1.1.2.1
snmpget -v2c -c public <target> AC-SYSTEM-MIB::acSysActionSetResetControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.10.3.1.1.2.1 i <value>

Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-SYSTEM-MIB::acSysActionSetResetControl OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways/media servers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5003audioCodesAC-ATM-MIB
1.3.6.1.4.1.5003.9acProductsAC-ATM-MIB
1.3.6.1.4.1.5003.9.10acBoardMibsAC-ATM-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5003.9.10.10acSystemAC-SYSTEM-MIB
1.3.6.1.4.1.5003.9.10.10.3acSystemActionAC-SYSTEM-MIB
1.3.6.1.4.1.5003.9.10.10.3.1acSysActionAC-SYSTEM-MIB
1.3.6.1.4.1.5003.9.10.10.3.1.1acSysActionSetAC-SYSTEM-MIB
1.3.6.1.4.1.5003.9.10.10.3.1.1.2acSysActionSetResetControlAC-SYSTEM-MIB