All MIBs › AC-SYSTEM-MIB › acMultipleIPEnableSCTPasControl
acMultipleIPEnableSCTPasControl
Module: AC-SYSTEM-MIB
OID (symbolic): AC-SYSTEM-MIB::acMultipleIPEnableSCTPasControl
OID (numeric): 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the location of the Stream Control Transmission Protocol (SCTP). If this parameter is set and the machine is functioning in multiple IPs mode, the SCTP is located on the control network. If not, the SCTP is located on the OAM network.
0 = Default 1 = Enable. Access: Offline. AC INI-Param: EnableSCTPasControl
What is acMultipleIPEnableSCTPasControl?
This OID sets which network interface carries SCTP (Stream Control Transmission Protocol) signaling in multiple-IP mode (0=default/OAM network, 1=control network). A telecom engineer would enable this when the device needs to send SCTP signaling over the high-priority control network to guarantee delivery of critical call setup messages. For example, setting this to 1 routes all SCTP protocol messages through the control network interface to ensure low-latency, reliable signaling delivery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5 snmpwalk -v2c -c public <target> AC-SYSTEM-MIB::acMultipleIPEnableSCTPasControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5.1 snmpget -v2c -c public <target> AC-SYSTEM-MIB::acMultipleIPEnableSCTPasControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5.1 i <value>
Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-SYSTEM-MIB::acMultipleIPEnableSCTPasControl OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways/media servers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.10 | acSystem | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1 | acSystemConfiguration | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3 | acSysNetworkConfig | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1 | acSysIP | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1.30 | acMultipleIP | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.5 | acMultipleIPEnableSCTPasControl | AC-SYSTEM-MIB |