All MIBs › AC-SYSTEM-MIB › acMultipleIPEnableNTPasOAM
acMultipleIPEnableNTPasOAM
Module: AC-SYSTEM-MIB
OID (symbolic): AC-SYSTEM-MIB::acMultipleIPEnableNTPasOAM
OID (numeric): 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the location of the Network Time Protocol (NTP). If this parameter is set and the machine is functioning in multiple IPs mode, the NTP is located on the OAM network. If not, the NTP is located on the control network.
0 = Disable 1 = Enable. Access: Offline. AC INI-Param: EnableNTPasOAM
What is acMultipleIPEnableNTPasOAM?
This OID determines whether NTP (clock synchronization) traffic flows over the OAM management network or the control network when multiple IPs are enabled (0=control, 1=OAM). An administrator would set this to 1 to isolate time-critical management traffic on a dedicated network, preventing congestion from affecting clock accuracy. For example, setting this to 1 makes the device contact NTP servers on the out-of-band management network to keep system time synchronized independently of data traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4 snmpwalk -v2c -c public <target> AC-SYSTEM-MIB::acMultipleIPEnableNTPasOAM
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4.1 snmpget -v2c -c public <target> AC-SYSTEM-MIB::acMultipleIPEnableNTPasOAM.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4.1 i <value>
Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-SYSTEM-MIB::acMultipleIPEnableNTPasOAM OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways/media servers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.10 | acSystem | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1 | acSystemConfiguration | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3 | acSysNetworkConfig | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1 | acSysIP | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1.30 | acMultipleIP | AC-SYSTEM-MIB |
| 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.4 | acMultipleIPEnableNTPasOAM | AC-SYSTEM-MIB |