All MIBs › A3COM-SWITCHING-SYSTEMS-POLL-MIB › a3ComPollSourceAddress
a3ComPollSourceAddress
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollSourceAddress
OID (numeric): 1.3.6.1.4.1.43.29.4.22.1.1.9
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This DisplayString is the network address of the local interface to receive ping query. Typically this is an IP, IPX or AppleTalk. The following formats can be used. IP cccc - ipAddress MIB IP nnn.nnn.nnn.nnn - dotted format IPX AABBCCDD:AABBCCDDEEFF - network : node AppleTalk n[...].n[...] - dotted notation
If a3ComPollSourceAddress is set to empty, which is the default value, the sending device will pick the best interface to receive the response for its queries.
The object a3ComPollAddressType is used to indicate how this object will be interpreted, as well as a3ComPollAddress. An exception exists when a3ComPollAddressType is set to ipname(4): this object will be parsed as if a3ComPollAddressType was set to ip(2) or as ipdotted(3), depending on the length of the object value. Therefore, ip name is not supported for a3ComPollSourceAddress.
This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1).
What is a3ComPollSourceAddress?
This is the source IP or interface address for ping packets. It specifies which local address to use as the ping source. For example, "192.168.1.2" for outgoing pings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.9 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollSourceAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.9.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollSourceAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.22.1.1.9.1 s <value>
Start monitoring Legacy 3Com switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollSourceAddress OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.22 | a3ComPoll | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1 | a3ComPollTable | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1 | a3ComPollEntry | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1.9 | a3ComPollSourceAddress | A3COM-SWITCHING-SYSTEMS-POLL-MIB |