All MIBs › A3COM-SWITCHING-SYSTEMS-POLL-MIB › a3ComPollResponseTimeOut
a3ComPollResponseTimeOut
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollResponseTimeOut
OID (numeric): 1.3.6.1.4.1.43.29.4.22.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Maximum wait time, in msecs, for a response packet before deciding that no response arrived. This object differs from a3ComPollRate as the device have the sending and receiving queues independent, making it possible to send ping requests at rates faster than receiving.
The value of 0 (default) will be interpreted as a request for time-out by the time a new packet is sent, and 65535 as a request for maximum wait. Assuming that burst is used and this object is set to one, most likely all packets sent will be interpreted as timed out.
This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1).
What is a3ComPollResponseTimeOut?
This is the timeout in milliseconds waiting for a ping response. If no reply arrives within this time, the ping is counted as lost. For example, setting to 1000 waits 1 second.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.7 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollResponseTimeOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.7.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollResponseTimeOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.22.1.1.7.1 i <value>
Start monitoring Legacy 3Com switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollResponseTimeOut OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.22 | a3ComPoll | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1 | a3ComPollTable | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1 | a3ComPollEntry | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1.7 | a3ComPollResponseTimeOut | A3COM-SWITCHING-SYSTEMS-POLL-MIB |