All MIBs › A3COM-SWITCHING-SYSTEMS-POLL-MIB › a3ComPollCount
a3ComPollCount
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollCount
OID (numeric): 1.3.6.1.4.1.43.29.4.22.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This integer is the number of ping packets to be sent out until completion of a polling command. If count is set to continuous(0), the remote device will be kept monitored and the a3ComPollReport will be normally set to busy(2) upon poll activation.
This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1).
What is a3ComPollCount?
This sets the number of ping packets to send in a cycle (0 = continuous). It controls test length and network traffic generated. For example, setting to 10 sends exactly 10 ping packets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.4 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.4.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.22.1.1.4.1 i <value>
Start monitoring Legacy 3Com switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollCount OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.22 | a3ComPoll | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1 | a3ComPollTable | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1 | a3ComPollEntry | A3COM-SWITCHING-SYSTEMS-POLL-MIB |
| 1.3.6.1.4.1.43.29.4.22.1.1.4 | a3ComPollCount | A3COM-SWITCHING-SYSTEMS-POLL-MIB |