A3COM-SWITCHING-SYSTEMS-POLL-MIB :: a3ComPollAddress

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM-SWITCHING-SYSTEMS-POLL-MIB › a3ComPollAddress

a3ComPollAddress

Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB

OID (symbolic): A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollAddress

OID (numeric): 1.3.6.1.4.1.43.29.4.22.1.1.2

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This DisplayString is the network address of the device to monitor. Typically this is an IP, dotted IP format, IP's hostname, IPX or AppleTalk. The following formats can be used: IP cccc - ipAddress MIB IP nnn.nnn.nnn.nnn - dotted format IP hostname IPX AABBCCDD:AABBCCDDEEFF - network : node AppleTalk n[...].n[...] - dotted notation

The object a3ComPollAddressType is used to indicate how this object will be interpreted.

This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1).

What is a3ComPollAddress?

This is the IP address, hostname, or IPX address of the device being monitored. It specifies the target for ping/connectivity tests. For example, "192.168.1.1" or "router.example.com".

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.2
snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.22.1.1.2.1
snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.22.1.1.2.1 s <value>

Start monitoring Legacy 3Com switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-POLL-MIB::a3ComPollAddress OID value, configure state conditions and alerts, and monitor any Legacy 3Com switching equipment from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.29switchingSystemsMibsA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
1.3.6.1.4.1.43.29.4a3ComSwitchingSystemsMibA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.29.4.22a3ComPollA3COM-SWITCHING-SYSTEMS-POLL-MIB
1.3.6.1.4.1.43.29.4.22.1a3ComPollTableA3COM-SWITCHING-SYSTEMS-POLL-MIB
1.3.6.1.4.1.43.29.4.22.1.1a3ComPollEntryA3COM-SWITCHING-SYSTEMS-POLL-MIB
1.3.6.1.4.1.43.29.4.22.1.1.2a3ComPollAddressA3COM-SWITCHING-SYSTEMS-POLL-MIB