All MIBs › A3COM-SWITCHING-SYSTEMS-FDDI-MIB › a3ComFddiSMTHoldState
a3ComFddiSMTHoldState
Module: A3COM-SWITCHING-SYSTEMS-FDDI-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiSMTHoldState
OID (numeric): 1.3.6.1.4.1.43.29.10.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active-Actions and when the conditions causing 'holding-prm' or 'holding-sec' are no longer true. The value 'holding-prm' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the A Port. The value 'holding-sec' must be set when the condition (notTR-Flag & not RE-Flag & (PC-LS=QLS | LEM-Fail TNE>NS-Max | (not LS-Flag & TPC > T-Out))) is satisfied in state PC8:ACTIVE for the B Port.
What is a3ComFddiSMTHoldState?
This enum reports the Hold function state: not-holding (default), holding-prm (primary), or holding-sec (secondary). It indicates whether the FDDI device is temporarily blocking traffic for recovery. For example, holding-prm means the device detected a failure and is holding traffic on the primary ring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.10.1.1.1.4 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiSMTHoldState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.10.1.1.1.4.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiSMTHoldState.1
Start monitoring 3Com SuperStack switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiSMTHoldState OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.10 | a3ComSwitchingSystemsFddiMib | A3COM-SWITCHING-SYSTEMS-FDDI-MIB |
| 1.3.6.1.4.1.43.29.10.1 | a3ComFddiSMT | A3COM-SWITCHING-SYSTEMS-FDDI-MIB |
| 1.3.6.1.4.1.43.29.10.1.1 | a3ComFddiSMTTable | A3COM-SWITCHING-SYSTEMS-FDDI-MIB |
| 1.3.6.1.4.1.43.29.10.1.1.1 | a3ComFddiSMTEntry | A3COM-SWITCHING-SYSTEMS-FDDI-MIB |
| 1.3.6.1.4.1.43.29.10.1.1.1.4 | a3ComFddiSMTHoldState | A3COM-SWITCHING-SYSTEMS-FDDI-MIB |