A3COM-SWITCHING-SYSTEMS-FDDI-MIB :: a3ComFddiMACBridgeFunctions

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM-SWITCHING-SYSTEMS-FDDI-MIB › a3ComFddiMACBridgeFunctions

a3ComFddiMACBridgeFunctions

Module: A3COM-SWITCHING-SYSTEMS-FDDI-MIB

OID (symbolic): A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACBridgeFunctions

OID (numeric): 1.3.6.1.4.1.43.29.10.2.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates the MAC's optional bridging functions.

The Value -1 is used to indicate that bridging is not supported by this MAC.

The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to the sum. The powers are according to the following table:

Function Power tb 0 -- Transparent bridging active sr 1 -- Src routing active srt 2 -- Src routing transparent active

What is a3ComFddiMACBridgeFunctions?

This read-only integer encodes which optional bridging functions the MAC supports, with -1 indicating no bridging support and bitmask values 0-7 showing enabled features like transparent and source-route bridging. Operators check this to confirm what bridging capabilities exist on the port. A value of 3 means both transparent bridging and source-route bridging are active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.10.2.1.1.3
snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACBridgeFunctions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.10.2.1.1.3.1
snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACBridgeFunctions.1

Start monitoring 3Com SuperStack switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-FDDI-MIB::a3ComFddiMACBridgeFunctions OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.29switchingSystemsMibsA3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.29.10a3ComSwitchingSystemsFddiMibA3COM-SWITCHING-SYSTEMS-FDDI-MIB
1.3.6.1.4.1.43.29.10.2a3ComFddiMACA3COM-SWITCHING-SYSTEMS-FDDI-MIB
1.3.6.1.4.1.43.29.10.2.1a3ComFddiMACBridgeFunctionTableA3COM-SWITCHING-SYSTEMS-FDDI-MIB
1.3.6.1.4.1.43.29.10.2.1.1a3ComFddiMACBridgeFunctionEntryA3COM-SWITCHING-SYSTEMS-FDDI-MIB
1.3.6.1.4.1.43.29.10.2.1.1.3a3ComFddiMACBridgeFunctionsA3COM-SWITCHING-SYSTEMS-FDDI-MIB