A3COM-SDLC-R1-MIB :: sdlcPortAdminPAUSE

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-SDLC-R1-MIBsdlcPortAdminPAUSE

sdlcPortAdminPAUSE

Module: A3COM-SDLC-R1-MIB

OID (symbolic): A3COM-SDLC-R1-MIB::sdlcPortAdminPAUSE

OID (numeric): 1.3.6.1.4.1.43.2.25.1.1.1.6

Node type: OBJECT-TYPE

Type: TimeTicks

Access: read-write

Description: This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive.

The object descriptor contains the name of an NCP configuration parameter, PAUSE. Please note that the value of this object represents 1/100ths of a second while the NCP PAUSE is represented in 1/10ths of a second.

This object only has meaning for SDLC ports where sdlcPortAdminRole == primary

What is sdlcPortAdminPAUSE?

This TimeTicks object specifies minimum centiseconds between successive polls of secondaries on a primary multipoint port. High values reduce processor load but increase secondary response delay; low values improve responsiveness. A value of 100 means at least 1 second between each complete poll cycle.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.1.1.1.6
snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcPortAdminPAUSE

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.1.1.1.6.1
snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcPortAdminPAUSE.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.25.1.1.1.6.1 i <value>

Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcPortAdminPAUSE OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.25sdlcA3COM-SDLC-R1-MIB
1.3.6.1.4.1.43.2.25.1sdlcPortGroupA3COM-SDLC-R1-MIB
1.3.6.1.4.1.43.2.25.1.1sdlcPortAdminTableA3COM-SDLC-R1-MIB
1.3.6.1.4.1.43.2.25.1.1.1sdlcPortAdminEntryA3COM-SDLC-R1-MIB
1.3.6.1.4.1.43.2.25.1.1.1.6sdlcPortAdminPAUSEA3COM-SDLC-R1-MIB