All MIBs › A3COM-SDLC-R1-MIB › sdlcPortAdminACTIVTO
sdlcPortAdminACTIVTO
Module: A3COM-SDLC-R1-MIB
OID (symbolic): A3COM-SDLC-R1-MIB::sdlcPortAdminACTIVTO
OID (numeric): 1.3.6.1.4.1.43.2.25.1.1.1.5
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: This parameter defines the period of time (in 1/100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. A value of zero indicates no timeout. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive.
This object only has meaning for SDLC ports where sdlcPortAdminType == switched
The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds.
What is sdlcPortAdminACTIVTO?
This TimeTicks object (centiseconds) sets the idle-line timeout for switched SDLC lines before disconnecting; zero disables the timeout. When a switched line has no I-Frame traffic, reaching this timer triggers disconnect to save carrier costs. For example, 600 centiseconds (6 seconds) drops idle lines after 6 seconds of silence.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.1.1.1.5 snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcPortAdminACTIVTO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.1.1.1.5.1 snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcPortAdminACTIVTO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.25.1.1.1.5.1 i <value>
Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcPortAdminACTIVTO OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.25 | sdlc | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.1 | sdlcPortGroup | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.1.1 | sdlcPortAdminTable | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.1.1.1 | sdlcPortAdminEntry | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.1.1.1.5 | sdlcPortAdminACTIVTO | A3COM-SDLC-R1-MIB |