All MIBs › A3COM-SDLC-R1-MIB › sdlcLSOperRETRIESt
sdlcLSOperRETRIESt
Module: A3COM-SDLC-R1-MIB
OID (symbolic): A3COM-SDLC-R1-MIB::sdlcLSOperRETRIESt
OID (numeric): 1.3.6.1.4.1.43.2.25.2.2.1.10
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-only
Description: This object reflects the current interval (in 1/100ths of a second) between retry sequences for an SDLC link station if multiple retry sequences are specified. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received.
The object descriptor contains the name of an NCP configuration parameter, RETRIESt. Please note that the value of this object represents 1/100ths of a second while the NCP RETRIESt is represented in seconds.
The current number of repeated retries sequences is reflected by the object: sdlcLSOperRETRIESn. The current retries per sequence is reflected by the object: sdlcLSOperRETRIESm.
What is sdlcLSOperRETRIESt?
This OID reports the current interval in centiseconds between retry sequences when multiple retries are configured, allowing operators to observe the backoff timing. A longer interval reduces network load during congestion and gives peers time to recover. A typical value of 100 centiseconds (1 second) means the station waits 1 second between successive retry attempts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.2.1.10 snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSOperRETRIESt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.2.1.10.1 snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSOperRETRIESt.1
Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcLSOperRETRIESt OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.25 | sdlc | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2 | sdlcLSGroup | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2 | sdlcLSOperTable | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2.1 | sdlcLSOperEntry | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2.1.10 | sdlcLSOperRETRIESt | A3COM-SDLC-R1-MIB |