All MIBs › A3COM-SDLC-R1-MIB › sdlcLSOperREPLYTO
sdlcLSOperREPLYTO
Module: A3COM-SDLC-R1-MIB
OID (symbolic): A3COM-SDLC-R1-MIB::sdlcLSOperREPLYTO
OID (numeric): 1.3.6.1.4.1.43.2.25.2.2.1.5
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-only
Description: This object reflects the current reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or message before the specified time expires then the appropriate error recovery shall be initiated.
The object descriptor contains the name of an NCP configuration parameter, REPLYTO. Please note that the value of this object represents 1/100ths of a second while the NCP REPLYTO is represented in 1/10ths of a second.
This object only has meaning for SDLC ports where sdlcPortOperRole == primary
What is sdlcLSOperREPLYTO?
This read-only OID displays the current reply timeout in centiseconds (hundredths of a second) for the SDLC link station; if no response arrives within this window, error recovery is triggered. Engineers monitor this to ensure communication delays do not exceed the configured threshold, preventing link outages from slow responses. A typical value might be 500 centiseconds (5 seconds), allowing adequate time for packet transmission and processing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.2.1.5 snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSOperREPLYTO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.2.1.5.1 snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSOperREPLYTO.1
Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcLSOperREPLYTO OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.25 | sdlc | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2 | sdlcLSGroup | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2 | sdlcLSOperTable | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2.1 | sdlcLSOperEntry | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.2.1.5 | sdlcLSOperREPLYTO | A3COM-SDLC-R1-MIB |