All MIBs › A3COM-SDLC-R1-MIB › sdlcLSAdminRNRLIMIT
sdlcLSAdminRNRLIMIT
Module: A3COM-SDLC-R1-MIB
OID (symbolic): A3COM-SDLC-R1-MIB::sdlcLSAdminRNRLIMIT
OID (numeric): 1.3.6.1.4.1.43.2.25.2.1.1.12
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: This object controls the length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (RNR) state before declaring it inoperative.
A value of sdlcLSAdminRNRLIMIT == 0 means there is no limit.
The object descriptor contains the name of an NCP configuration parameter, RNRLIMIT. Please note that the value of this object represents 1/100ths of a second while the NCP RNRLIMIT is represented in minutes.
Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperRNRLIMIT, until the link station is cycled inactive.
What is sdlcLSAdminRNRLIMIT?
This timeout (in hundredths of a second) bounds how long a station tolerates receiving RNR (busy) responses from the peer before assuming it failed. A zero value disables the limit, allowing indefinite busy periods. Typical setting is 300-1000 (3-10 seconds).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.1.1.12 snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSAdminRNRLIMIT
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.1.1.12.1 snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSAdminRNRLIMIT.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.25.2.1.1.12.1 i <value>
Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcLSAdminRNRLIMIT OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.25 | sdlc | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2 | sdlcLSGroup | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1 | sdlcLSAdminTable | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1.1 | sdlcLSAdminEntry | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1.1.12 | sdlcLSAdminRNRLIMIT | A3COM-SDLC-R1-MIB |