All MIBs › A3COM-SDLC-R1-MIB › sdlcLSAdminREPLYTO
sdlcLSAdminREPLYTO
Module: A3COM-SDLC-R1-MIB
OID (symbolic): A3COM-SDLC-R1-MIB::sdlcLSAdminREPLYTO
OID (numeric): 1.3.6.1.4.1.43.2.25.2.1.1.5
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-write
Description: This object controls the reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or message before the specified time expires then the appropriate error recovery shall be initiated.
The object descriptor contains the name of an NCP configuration parameter, REPLYTO. Please note that the value of this object represents 1/100ths of a second while the NCP REPLYTO is represented in 1/10ths of a second.
Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperREPLYTO, until the link station is cycled inactive.
This object only has meaning for SDLC ports where sdlcPortAdminRole == primary
What is sdlcLSAdminREPLYTO?
This configurable timeout (in hundredths of a second) specifies how long the station waits for responses to polls or frames before triggering error recovery. Setting it too low causes false timeouts; too high increases latency to detect real failures. Typical values range 30-300 (0.3-3 seconds).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.1.1.5 snmpwalk -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSAdminREPLYTO
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.25.2.1.1.5.1 snmpget -v2c -c public <target> A3COM-SDLC-R1-MIB::sdlcLSAdminREPLYTO.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.25.2.1.1.5.1 i <value>
Start monitoring Legacy 3Com SDLC/SNA gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SDLC-R1-MIB::sdlcLSAdminREPLYTO OID value, configure state conditions and alerts, and monitor any Legacy 3Com SDLC/SNA gateways from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.25 | sdlc | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2 | sdlcLSGroup | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1 | sdlcLSAdminTable | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1.1 | sdlcLSAdminEntry | A3COM-SDLC-R1-MIB |
| 1.3.6.1.4.1.43.2.25.2.1.1.5 | sdlcLSAdminREPLYTO | A3COM-SDLC-R1-MIB |