A3COM-HUAWEI-NS-MIB

All MIBs › A3COM-HUAWEI-NS-MIB

Organization: Huawei-3Com Technologies Co.,Ltd.

Last Updated: 2004-11-07

Category: Vendor: H3C/HH3C

Description: Manages network service objects on H3C/3Com devices, providing configuration for service policies, traffic classification, and network service definitions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-NS-MIB?

A3COM-HUAWEI-NS-MIB is an H3C/3Com enterprise MIB for network traffic statistics and classification, sorting IP packets by source/destination address, port, protocol, ToS, and input interface, then counting octets and packets before forwarding the statistics to an external collector. No sample objects were supplied in the source data. Its monitoring role is traffic-analytics oriented: it would expose classified flow counters (packets/octets per classification key) useful for capacity planning, application-mix visibility, or anomaly detection, rather than hardware health metrics. It appears to function alongside an external statistics collector, implying a dependency on that collection protocol/service though no specific standard MIB dependency is named. It is deployed on H3C/3Com routers where traffic classification and flow-based accounting data needs to be exported for analysis. Engineers can download the A3COM-HUAWEI-NS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-NS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com routers

Monitoring Examples

No sample objects were supplied for this MIB, so specific object names cannot be honestly cited; based on the module description, it would classify traffic by source/destination IP, port, protocol, ToS, and inbound interface, then maintain octet/packet counters per class. An admin would monitor these classified counters to spot an unexpected surge in a particular traffic class (e.g., a specific protocol or ToS marking) that could indicate misconfiguration or abuse. Without concrete object names in the source data, a more specific polling scenario cannot be responsibly described.

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using h3cNSExportStream OID:

Select an H3C/3Com router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cNSExportStream into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object counts the exported streams. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cNS	1.3.6.1.4.1.43.45.1.10.2.20			This MIB contains objects to manage the configuration and status information of network traffic statistics. It classifies the IP packets by source IP address, source port, destination IP address, destination port, protocol, ToS and input interface, counts the octets and packets, and sends the statistic information to the specific collector.
h3cNSMibObjects	1.3.6.1.4.1.43.45.1.10.2.20.1
h3cNSMibScalarObjects	1.3.6.1.4.1.43.45.1.10.2.20.1.1
I32 h3cNSActiveTime	1.3.6.1.4.1.43.45.1.10.2.20.1.1.1	Integer32	read-write	The stream will be aged when the active time of this stream exceeds this value. This object is in minute.
I32 h3cNSInactiveTime	1.3.6.1.4.1.43.45.1.10.2.20.1.1.2	Integer32	read-write	The stream will be aged when the inactive time of this stream exceeds this value. This object is in second.
I32 h3cNSVersion	1.3.6.1.4.1.43.45.1.10.2.20.1.1.3	Integer32	read-write	The version of the exported packet, which describes the format of the exported packet. It should export version 5 and version 8 when this object is 5, but it should export version 9 only when the value of this object is 9.
INT h3cNSAsType	1.3.6.1.4.1.43.45.1.10.2.20.1.1.4	INTEGER	read-write	The number of autonomous system (AS). This object can be origin or peer.
I32 h3cNSTemplateRefreshRate	1.3.6.1.4.1.43.45.1.10.2.20.1.1.5	Integer32	read-write	This object specifies the refresh rate in number of exported packets.
I32 h3cNSTemplateTimeout	1.3.6.1.4.1.43.45.1.10.2.20.1.1.6	Integer32	read-write	This object specifies the timeout rate in minutes.
INT h3cNSExportVlanOrIfIndex	1.3.6.1.4.1.43.45.1.10.2.20.1.1.7	INTEGER	read-only	This object describes the interface index at the exported packet. It can be interface index or vlan id according to the product.
h3cNSProcessSlotTable	1.3.6.1.4.1.43.45.1.10.2.20.1.2		not-accessible	This table describes the board which can enable network traffic statistics at the switch or router.
h3cNSProcessSlotEntry	1.3.6.1.4.1.43.45.1.10.2.20.1.2.1		not-accessible	The entry of h3cNSProcessSlotEntry.
I32 h3cNSProcessSlot	1.3.6.1.4.1.43.45.1.10.2.20.1.2.1.1	Integer32	read-only	This object describes all boards which can processes network traffic statistics at the switch or router.
h3cNSExportConfigTable	1.3.6.1.4.1.43.45.1.10.2.20.1.3		not-accessible	This table describes the configuration of the exported packets.
h3cNSExportConfigEntry	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1		not-accessible	The entry of h3cNSExportConfigTable.
INT h3cNSAggregationType	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1.1	INTEGER	not-accessible	The aggregation type. v5Statistics type counts IP packets which have same source IP address, destination IP address, source port, destination port, protocol, ToS, input interface, output interface. AS type counts IP packets which have same source AS, destination AS, input interface and output interface. destinationPrefix type counts IP packets which have same destination AS, output interface, destination mask and destination prefix. sourcePrefix type counts IP packets which have same source AS, input interface, source mask and source prefix. protocolPort type counts IP packets which have same protocol, source port and destination port. prefix type counts IP packets which have same source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. tosAS type counts IP packets which have same tos, source AS, destination AS, input interface and output interface. tosDestinationPrefix type counts IP packets which have same tos, destination AS, output interface, destination mask and destination prefix. tosProtocolPort type counts IP packets which have same tos, protocol, source port and destination port. tosSourcePrefix type counts IP packets which have same tos, source AS, input interface, source mask and source prefix. tosPrefix type counts IP packets which have same tos, source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. prefixPort type counts IP packets which have same tos, input interface, output interface, source mask, source prefix, destination mask, destination prefix, source port and destination port.
IP h3cNSHostIPAddr	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1.2	IpAddress	read-write	The destination IP address of the exported packet. This destination IP address is a NSC (NS Collector) address.
I32 h3cNSHostPort	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1.3	Integer32	read-write	The destination port of the exported packets. This destination port is a NSC listening port.
IP h3cNSSrcIpAddr	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1.4	IpAddress	read-write	The source IP address of the exported packets.
INT h3cNSState	1.3.6.1.4.1.43.45.1.10.2.20.1.3.1.5	INTEGER	read-write	The state of aggregation is enabled or disabled.
h3cNSExportInformationTable	1.3.6.1.4.1.43.45.1.10.2.20.1.4		not-accessible	This table describes the Information of the exported packets.
h3cNSExportInformationEntry	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1		not-accessible	The entry of h3cNSExportInformationTable.
INT h3cNSExportType	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1.1	INTEGER	not-accessible	This object is equal to h3cNSAggregationType.
I32 h3cNSExportSlot	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1.2	Integer32	not-accessible	This object is equal to h3cNSProcessSlot.
C32 h3cNSExportStreamEx	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1.3	Counter32	read-only	This object counts the exported streams.
C32 h3cNSExportNum	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1.4	Counter32	read-only	This object counts the exported packets.
C32 h3cNSExportFail	1.3.6.1.4.1.43.45.1.10.2.20.1.4.1.5	Counter32	read-only	This object counts the exported packets which failed to send. The error may be unreachable destination IP address.
h3cNSConfigTable	1.3.6.1.4.1.43.45.1.10.2.20.1.5		not-accessible	This table describes current configurations.
h3cNSConfigEntry	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1		not-accessible	The entry of h3cNSAggregationTable.
I32 h3cNSSourceSlot	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.1	Integer32	not-accessible	The IP packet will be counted when it is passing through this slot.
I32 h3cNSSourceIfIndex	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.2	Integer32	not-accessible	The IP packet will be statistics when it through this interface. This object is equal to ifIndex at ifTable.
I32 h3cNSDestSlot	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.3	Integer32	not-accessible	This object is equal to h3cNSProcessSlot.
INT h3cNSDirect	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.4	INTEGER	read-create	This object describes which packets will be counted. It may be inbound or outbound packets through this interface.
I32 h3cNSACLNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.5	Integer32	read-create	The number of number-acl group.
OCT h3cNSACLName	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.6	OCTET STRING	read-create	The name of name-acl group.
I32 h3cNSACLRule	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.7	Integer32	read-create	The rule of acl group.
ROW h3cNSConfigRowStatus	1.3.6.1.4.1.43.45.1.10.2.20.1.5.1.8	RowStatus	read-create	SNMP Row Status Variable. Writable objects in the table may be written in any RowStatus state.
h3cNSStatusTable	1.3.6.1.4.1.43.45.1.10.2.20.1.6		not-accessible	This table describes current information of network traffic.
h3cNSStatusEntry	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1		not-accessible	The entry of h3cNSAggregationTable.
I32 h3cNSSlot	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.1	Integer32	not-accessible	This object is equal to h3cNSProcessSlot.
C32 h3cNSActiveStreamNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.2	Counter32	read-only	This object counts current active streams.
C32 h3cNSTotalStreamNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.3	Counter32	read-only	This object counts all statistic streams.
C32 h3cNSTotalPacketNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.4	Counter32	read-only	This object counts all statistic packets.
C32 h3cNSTotalOctetNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.5	Counter32	read-only	This object counts all statistic octets.
C32 h3cNSMPLSActiveStreamNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.6	Counter32	read-only	This object counts current active MPLS streams.
C32 h3cNSMPLSTotalStreamNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.7	Counter32	read-only	This object counts all statistic MPLS streams.
C32 h3cNSMPLSTotalPacketNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.8	Counter32	read-only	This object counts all statistic MPLS packets.
C32 h3cNSMPLSTotalOctetNumber	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.9	Counter32	read-only	This object counts all statistic octets of MPLS packets.
INT h3cNSResetFlag	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.10	INTEGER	read-create	Reset all streams. The default value is disabled, and set this value to enabled when resetting.
TIK h3cNSResetTime	1.3.6.1.4.1.43.45.1.10.2.20.1.6.1.11	TimeTicks	read-only	The system up time when stream is reset.

RFC description

3Com/Huawei Network Services MIB providing management objects for network services on 3Com and Huawei devices

Start monitoring H3C/3Com routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-NS-MIB

What Is A3COM-HUAWEI-NS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description