A3COM-HUAWEI-MPLS-LSR-MIB :: mplsXCIndexNext

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-HUAWEI-MPLS-LSR-MIBmplsXCIndexNext

mplsXCIndexNext

Module: A3COM-HUAWEI-MPLS-LSR-MIB

OID (symbolic): A3COM-HUAWEI-MPLS-LSR-MIB::mplsXCIndexNext

OID (numeric): 1.3.6.1.4.1.43.45.1.5.12.1.1.8

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of mplsXCIndex for a new entry in the mplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.

What is mplsXCIndexNext?

This read-only integer supplies the next available unique index for creating new cross-connect (XC) entries in the MPLS label-switched path (LSP) table. Managers retrieve this value before provisioning a new LSP to avoid index collisions. If the value is zero, no unassigned indices remain and the system is at capacity; a typical next index might be 42 after creating 41 LSPs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.45.1.5.12.1.1.8
snmpwalk -v2c -c public <target> A3COM-HUAWEI-MPLS-LSR-MIB::mplsXCIndexNext

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.45.1.5.12.1.1.8.1
snmpget -v2c -c public <target> A3COM-HUAWEI-MPLS-LSR-MIB::mplsXCIndexNext.1

Start monitoring H3C/3Com MPLS routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-HUAWEI-MPLS-LSR-MIB::mplsXCIndexNext OID value, configure state conditions and alerts, and monitor any H3C/3Com MPLS routers from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.45jv_mibA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1huaweiA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.5huaweiMgmtA3COM-HUAWEI-OID-MIB
1.3.6.1.4.1.43.45.1.5.12hwMplsA3COM-HUAWEI-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.45.1.5.12.1hwMplsLsrA3COM-HUAWEI-MPLS-LSR-MIB
1.3.6.1.4.1.43.45.1.5.12.1.1mplsLsrObjectsA3COM-HUAWEI-MPLS-LSR-MIB
1.3.6.1.4.1.43.45.1.5.12.1.1.8mplsXCIndexNextA3COM-HUAWEI-MPLS-LSR-MIB